May 1989 | Technical Report TR-89-243
Spectrum-Conservation Techniques for Fixed Microwave Systems
Cite This Publication
Robert L. Hinkle and Andrew Farrar, “Spectrum-Conservation Techniques for Fixed Microwave Systems,” Technical Report TR-89-243, U.S. Department of Commerce, National Telecommunications and Information Administration, Institute for Telecommunication Sciences, May 1989.
Robert L. Hinkle and Andrew Farrar
Abstract: Since the spectrum is a limited natural resource, the spectrum management community has a major interest in identifying spectrum conservation techniques that will provide more efficient spectrum utilization. Advances in new technology for fixed microwave systems in antennas, modulation schemes and signal processing techniques offer increased efficiency in spectrum utilization. This report analyzes the spectrum conserving properties of the various new technologies for fixed microwave systems applying the concepts in CCIR Report 662-2, and was defined as the spectrum conservation factor (SCF). The report concludes that the SCF technique is an effective indicator of the spectrum conserving properties of technologies which can be used to develop new spectrum standards.
Keywords: spectrum efficiency; 7125–8500 MHz Band; spectrum conservation factor (SCF); fixed microwave system
Disclaimer: Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.