February 1986 | Handbook
Operators Manual: Refractivity Index Profile
Cite This Publication
Laurance G. Hause and J. E. Frankfurter, “Operators Manual: Refractivity Index Profile,” U.S. Department of Commerce, National Telecommunications and Information Administration, Institute for Telecommunication Sciences, February 1986.
Abstract:
This handbook contains instructions for operating the Refractivity Index Profile program. The RIP program is designed to calculate, tabulate, and plot the atmospheric refractivity index profiles for a given set of atmospheric data taken at a particular time and a particular location and being applied to a different location in the same general area. The program will give the operator a set of results in report ready format (Figures 1, 2, 3, 4, and Table 1). The following discussion will provide a detailed explanation on the running of the program.
Keywords: Refractivity Index Profile
For funding information concerning this report, click this link.
Funding Information
Performing Agency
Disclaimer:
Certain commercial equipment, components, and software may be identified in this report to specify adequately the technical aspects of the reported results. In no case does such identification imply recommendation or endorsement by the National Telecommunications and Information Administration, nor does it imply that the equipment or software identified is necessarily the best available for the particular application or uses.
For questions or information on this or any other NTIA scientific publication, contact the ITS Publications Office at ITSinfo@ntia.gov or 303-497-3572.